Pnp/Pci Configuration Setup - AXIOMTEK EP830 Series User Manual

EP830 All-In-One EPIC Board User's Manual

4.10 PnP/PCI Configuration Setup

This section describes the configuration of PCI (Personal Computer
Interconnect) bus system, which allows I/O devices to operate at
speeds close to the CPU speed while communicating with other
important components. This section covers very technical items that
only experienced users could change default settings.
 Init Display First
This item allows you to decide to active whether PCI Slot or AGP
first. The options available are PCI Slot, AGP.
 Reset Configuration Data
Normally, you leave this item Disabled. Select Enabled to reset
Extended System Configuration Data (ESCD) when you exit Setup
or if installing a new add-on cause the system reconfiguration a
serious conflict that the operating system can not boot. Options:
Enabled, Disabled.
 Resources Controlled By
The Award Plug and Play BIOS can automatically configure all
boot and Plug and Play-compatible devices. If you select Auto, all
interrupt request (IRQ), DMA assignment, and Used DMA fields
disappear, as the BIOS automatically assigns them. The default
value is "Manual".
62
Award BIOS Utility