Save & Exit Setup - AXIOMTEK SBC81870 Series User Manual

4.14 Save & Exit Setup
After you have completed adjusting all the settings as required,
you must remember to save these setting into the CMOS RAM.
To save the settings, select "SAVE & EXIT SETUP" and press
<Enter>, a display will be shown as follows:
Phoenix - AwardBIOS CMOS Setup Utility
►Standard CMOS Features
►Advanced BIOS Features
►Advanced Chipset Features
►Integrated Peripherals
►Power Management
►PnP/PCI Configura
►PC Health Status
Esc : Quit
F10 : Save & Exit Setup
When you confirm that you wish to save the settings, your
system will be automatically restarted and the changes you
have made will be implemented. You may always call up the
setup program at any time to adjust any of the individual items
by pressing the <Del> key during boot up.
Award BIOS Setup
®
SBC81870 Intel Pentium
►Frequency Control
Load Fail-Safe Defaults
Load Optimized Defaults
Set Supervisor Password
Save to CMOS and EXIT
Y/N)? Y
↑↓→←
: Select Item
Save Data to CMOS
®
M w/ DDR/VGA/Dual LAN
word
etup
Saving
83