Pnp/Pci Configuration Setup - AXIOMTEK SBC84820 Series User Manual

Pentium m all-in-one capa board with dualview display and sata

Hide thumbs Also See for SBC84820 Series:

Table of Contents

SBC84820 Pentium

M All-In-One Capa Board User's Manual

from entering a power saving mode or can awaken the system from

such a mode.

Primary/Secondary IDE 0/1

Use this item to configure the IDE devices monitored by the system.

FDD, COM, LPT Port

Use this item to configure the FDD, COM and LPT ports monitored

by the system.

PCI PIRQ[A-D]#

This item can be used to detect PCI device activities; if no activity, the

system will enter the sleep mode.

Press <Esc> to return to the Main Menu page.

4.10 PnP/PCI Configuration Setup

This section describes configuring the PCI bus system. PCI, or

Personal Computer Interconnect, is a system which allows I/O devices

to operate at speeds nearing the speed the CPU itself uses when

communicating with its own special components. This section covers

some very technical items and it is strongly recommended that only

experienced users should make any changes to the default settings.

Init Display First

This item allows you to decide whether PCI Slot or AGP to be the

first primary display card.

Reset Configuration Data

Award BIOS Utility

Table of Contents