1. Manuals
  2. Brands
  3. AXIOMTEK Manuals
  4. Motherboard
  5. SBC81613
  6. User manual

AXIOMTEK SBC81613 User Manual

Socket 370 full-size all-in-one cpu card series
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
SBC81613
Socket 370 Full-size
All-in-One
CPU Card Series
User's Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SBC81613 and is the answer not in the manual?

Questions and answers

Related Manuals for AXIOMTEK SBC81613

Summary of Contents for AXIOMTEK SBC81613

  • Page 1 SBC81613 Socket 370 Full-size All-in-One CPU Card Series User’s Manual...
  • Page 2 AXIOMTEK assumes no responsibility for any inaccuracies that may be contained in this document. AXIOMTEK makes no commitment to update or to keep current the information contained in this manual. AXIOMTEK reserves the right to make improvements to this document and/or product at any time and without notice.
  • Page 3 Wear a wrist-grounding strap, available from most electronic component stores, when handling boards and components. Trademarks Acknowledgments AXIOMTEK is a trademark of AXIOMTEK Co., Ltd. IBM is a registered trademark of International Business Machines Corporation. MS-DOS, and Windows 95/98/NT/2000 are trademarks of Microsoft Corporation.
  • Page 4 This page does not contain any information.

  • Page 5: Table Of Contents

    T a b l e o f C o n t e n t s Chapter 1 Introduction ------------------------------- 1 General Description ..........1 Specifications ............. 2 Utilities Supported ..........3 Board Dimensions ..........4 Chapter 2 Jumpers and Connectors-------------- 5 Board Layout ............
  • Page 6 Ethernet Connector: CN21, CN22 ...... 24 Floppy Disk Controller: CN8 ......24 4.10 Parallel Port Interface: CN1 ....... 25 4.11 Serial Port Interface: CN2, CN6 ......26 4.11.1 Serial Ports IRQ Selection ........26 4.12 Keyboard and PS/2 Mouse Connectors: CN18, CN19, CN20............
  • Page 7 7.11 Load Optimized Defaults ........61 7.12 Set Supervisor / User Password ......61 7.13 Save & Exit Setup ..........63 7.14 Exit Without Saving ........... 64 Appendix A Watchdog Timer ----------------------65 Appendix B PCI IRQ Rounting --------------------67 Table of Contents...
  • Page 8 This page does not contain any information.

  • Page 9: Chapter 1 Introduction

    C h a p t e r 1 Introduction General Description The SBC81613 Series CPU card is an industrial grade CPU card incorporating the VIA VT8606T/Super South VT82C686B chipset and S3 ProSavage 4 Flat panel VGA controller built in VT8606T, both ensuring its compatibility with PCI bus passive backplanes.

  • Page 10: Specifications

    SBC81613 Socket 370 All-in-One CPU Card Series User’s Manual Specifications Chipset: VIA 8606T, VT82C686B with integrated real-time clock CPU Socket: Socket 370 Bus Clock: 66/100/133 MHz CPU: Intel Socket 370 Celeron / Pentium III L2 Cache: Integrated in CPU BIOS:...

  • Page 11: Utilities Supported

    SBC81613 Socket 370 All-in-One CPU Card Series User’s Manual IrDA: 1 IrDA pin-header for wireless communication (SBC81613VEC, VECD does not support) Hardware Monitoring: Built-in VT86C686B, monitoring for CPU/System temperature, system voltage, and fan speed Watchdog Timer: Generates a system reset Software programmable time interval and jumper selectable 64 levels, 0.5~8/5~80/50~800/100~1600 seconds...

  • Page 12: Board Dimensions

    SBC81613 Socket 370 All-in-One CPU Card Series User’s Manual Board Dimensions 1219.20mm 249.94mm 67.31mm 127.00mm 67.06mm 76.96mm 127.00mm 140.21mm 63.25mm Introduction...

  • Page 13: Chapter 2 Jumpers And Connectors

    SBC81613 Socket 370 All-in-One CPU Card Series User’s Manual C h a p t e r 2 Jumpers and Connectors Board Layout CN18 VGA1 Jumpers and Connectors...

  • Page 14: Jumper Settings

    SBC81613 Socket 370 All-in-One CPU Card Series User’s Manual Jumper Settings Making the proper jumper settings configures the SBC81613 Series to match the needs of your application. The following summary table lists all onboard jumpers and their corresponding functions and/or default settings.

  • Page 15: Cmos Clear Jumper: Jp9

    SBC81613 Socket 370 All-in-One CPU Card Series User’s Manual 2.2.2 CMOS Clear Jumper: JP9 Options Settings Clear CMOS Short 2-3 Normal (default) Short 1-2 2.2.3 Watchdog Trigger Mode Setting: JP10 The watchdog timer is an indispensable feature of the SBC81613 Series. It has a sensitive error detection function and a report function.

  • Page 16: Audio Output Mode Settings: Jp2, Jp3, Jp5

    Some problems encountered by your system may be a result from loose or improper connections. Ensure that all connectors are in place and firmly attached. The following table lists the function of each connector on the SBC81613 Series. Jumpers and Connectors...
  • Page 17 SBC81613 Socket 370 All-in-One CPU Card Series User’s Manual Connectors Label Connectors Label Parallel Port CN15 (SBC81613VEC, VECD does not support) COM 1 Mini PCI CN16 (SBC81613VEC, VECD does not support) CD-ROM Aux In Wake On LAN: Reserved CN17 IDE 1...
  • Page 18 SBC81613 Socket 370 All-in-One CPU Card Series User’s Manual This page does not contain any information. Jumpers and Connectors...

  • Page 19: Chapter 3 Installation

    SBC81613 Socket 370 All-in-One CPU Card Series User’s Manual C h a p t e r 3 Installation This chapter describes the hardware installation procedures on the SBC81613 Series all-in-one Socket 370 CPU card. The following is a list of typical peripherals required to build a...

  • Page 20: Ultra Dma/66 Drive Installation

    SBC81613 Socket 370 All-in-One CPU Card Series User’s Manual Ultra DMA/66 Drive Installation To accommodate the fast transfer rate of Ultra DMA/66, an 80- conductor cable (with 40 pin connectors on both ends) is necessary when installing Ultra DMA/66 drives. The SBC81613 Series, on this aspect, can support a total of 4 Ultra DMA/66 drives.

  • Page 21: Completing Installation

    Set the configuration jumpers according to the jumper settings on Chapter 2. Install the SBC81613 Series CPU card into one of the slots on the passive backplane. You may allow the SBC81613 Series to stand alone as a single board computer.
  • Page 22 SBC81613 Socket 370 All-in-One CPU Card Series User’s Manual This page does not contain any information. Installation...

  • Page 23: Chapter 4 Hardware Description

    CPU to prevent any damage to the CPU. BIOS The system BIOS used in SBC81613 Series is Award Plug and Play BIOS. The SBC81613 Series contains a single 4MB Flash EPROM. For more detailed information, refer to Chapter 7 for a complete description of the BIOS setup utility and the available features accompanying it.

  • Page 24: I/O Port Address Map

    SBC81613 Socket 370 All-in-One CPU Card Series User’s Manual I/O Port Address Map The CPU card communicates via I/O ports. It has a total of 1KB port addresses that can be assigned to other devices via I/O expansion cards. Address...

  • Page 25: Interrupt Controller

    SBC81613 Socket 370 All-in-One CPU Card Series User’s Manual Interrupt Controller The SBC81613 Series is a fully PC compatible control board. It consists of 16 ISA interrupt request lines and 4 of the 16 can be either ISA or PCI. The mapping list of the 16 interrupt request lines is shown below;...

  • Page 26: General Output Connector: Cn9

    SBC81613 Socket 370 All-in-One CPU Card Series User’s Manual General Output Connector: CN9 Power LED This 3-pin connector, designated at Pins 1, 3, and 5 of CN9, connects the system power LED indicator to its respective switch on the case. Pins 1 & 3 are +, and pin 5 is assigned as -.

  • Page 27: Enhanced Ide Interface Connector: Cn4, Cn7

    This 2-pin connector, designated at Pins 13 & 14 of CN9, connects the ATX power button of the front panel to the SBC81613 Series CPU card – allowing user to control the power on/off state of the ATX power supply. This jumper is only useful when installing an ATX power supply and CN14 cable to the system.

  • Page 28: Vga Interface

    SBC81613 Socket 370 All-in-One CPU Card Series User’s Manual VGA Interface 4.7.1 Flat Panel/CRT Interface Controller The built-in S3 ProSavage4 is a high-performance flat panel/super VGA display controller with share 32M bytes system RAM. It is capable of driving a wide array of flat panel and CRT displays.
  • Page 29 SBC81613 Socket 370 All-in-One CPU Card Series User’s Manual connector and the flat panel connector. SBC81613VEC, VECD only supports LVDS panel CRT/VGA Connector Pin Assignment: VGA1 Signal Signal Signal AGND Green Blue AGND DDC DAT 10 AGND 12 Horizontal Sync...
  • Page 30 SBC81613 Socket 370 All-in-One CPU Card Series User’s Manual Flat Panel Connector Pin Assignment for XVGA: LCD2 Pin Description Pin Description Pin Description VDDM VDDM +12VM +12VM Connector for LVDS Panel: CN11 Description Description Description VDDM VDDM DIGON BLON TXU0-...

  • Page 31: Flat Panel Connector Pin Description

    SBC81613 Socket 370 All-in-One CPU Card Series User’s Manual 4.7.4 Flat Panel Connector Pin Description LCD1, LCD2 Pin Description Name Description P0~P35 Flat panel data output ENABKL Activity Indicator and Enable Backlight outputs SHFCLK Shift clock. Pixel clock for flat panel data M signal for panel AC drive control Latch pulse.

  • Page 32: Ethernet Connector: Cn21, Cn22

    Ethernet Connector: CN21, CN22 The RJ-45 connector is used for Ethernet. To connect the SBC81613 Series to 10,100 or 1000 Base-T hub, just plug one end of the cable into the CN21 or CN22. The LAN1 jack label is CN22 and the LAN2 jack lable is CN21.

  • Page 33: Parallel Port Interface: Cn1

    SBC81613 Socket 370 All-in-One CPU Card Series User’s Manual Side 1 select # Disk change # 4.10 Parallel Port Interface: CN1 The SBC81613 Series onboard CN1 is a multi-mode parallel port able to support: IBM PC/XT, PC/AT and PS/2 TM...

  • Page 34: Serial Port Interface: Cn2, Cn6

    COM1 port (CN2) supports RS-232 and COM2 (CN6) provide RS-232/422/485 connectivity. 4.11.1 Serial Ports IRQ Selection SBC81613 Series uses a 10-pin connector for COM2 (CN2) and a DB9-pin connector for COM1 (CN6). Interrupt Requests on COM1 and COM2 are selected via IRQ4 and IRQ3 respectively.

  • Page 35: Keyboard And Ps/2 Mouse Connectors: Cn18

    SBC81613 Socket 370 All-in-One CPU Card Series User’s Manual 4.12 Keyboard and PS/2 Mouse Connectors: CN18, CN19, CN20 The SBC81613 Series provides a keyboard (CN19) and PS/2 mouse (CN18) interface with a 5-pin connector. CN20 is a DIN connector for PS/2 keyboard connection.

  • Page 36: Usb Connector: Cn12, Cn13

    SBC81613 Socket 370 All-in-One CPU Card Series User’s Manual 4.13 USB Connector: CN12, CN13 The Universal Serial Bus (USB) connector on the SBC81613 Series is for installation of peripherals supporting the USB interface. CN12 and CN13 is the 10-pin USB connector on the SBC81613 Series.

  • Page 37: Acpi Connector: Cn14

    The specification enables new power management technology to evolve independently in operating systems and hardware while ensuring that they continue to work together. CN14 on the SBC81613 Series is a 6-pin header connector that provides ACPI interface. CN14 4.16 Mini-PCI Connector: CN16 This mini-PCI connector is designed for “on-board”...

  • Page 38: Audio Connector: Cn5

    SBC81613 Socket 370 All-in-One CPU Card Series User’s Manual 4.17 Audio Connector: CN5 The CN5 is a 10-pin connector for AC’97 audio input and output. Audio PIN Assignmen: CN5 Signal Signal MIC-IN Line In L Line In R Audio Out L Audio Out R 4.18 CD-ROM AUX Input Connector: CN3...

  • Page 39: Fan Connector: Fan1, Fan2

    SBC81613 Socket 370 All-in-One CPU Card Series User’s Manual 4.20 Fan Connector: FAN1, FAN2 The FAN1 and FAN2 are two 3-pin connectors for system Fan (FAN1) and CPU Cooler Fan (FAN2). FAN Connector PIN Assignment: FAN1, FAN2 Description Speed Sensor...
  • Page 40 SBC81613 Socket 370 All-in-One CPU Card Series User’s Manual This page does not contain any information. Hardware Description...

  • Page 41: Chapter 5 Display Introduction

    C h a p t e r 5 Display Introduction Introduction The LCD/VGA chipset used on the SBC81613 Series that can drive a wide range of monochrome and color flat panels including Single-Drive (SS) and Dual-Panel, Dual Drive (DD) passive STN and active matrix TFT / LVDS LCD, EL, and Plasma panels.

  • Page 42: Drivers Supported

    SBC81613 Socket 370 All-in-One CPU Card Series User’s Manual Drivers Supported The TwisterT is fully compatible with the VGA graphics standard at the register, gate, and BIOS levels. The manufacturer supplies fully VGA-compatible BIOS, end-user utilities and drivers for common application programs (e.g., Microsoft Windows ).

  • Page 43: Chapter 6 Ethernet Introduction

    SBC81613 Socket 370 All-in-One CPU Card Series User’s Manual C h a p t e r 6 Ethernet Introduction Introduction The SBC81613 Series is equipped with a high performance Plug and Play Ethernet interface which is fully compliant with the IEEE 802.3 standard, and consisting of a RJ-45 connector (CN21, CN22).
  • Page 44 SBC81613 Socket 370 All-in-One CPU Card Series User’s Manual This page does not contain any information. Ethernet Introduction...

  • Page 45: Chapter 7 Bios Configuration

    C h a p t e r 7 BIOS Configuration Chapter 4 describes the different settings available in the Award BIOS that comes with the SBC81613 Series CPU card. Also contained here are instructions on how to set up the BIOS configuration.
  • Page 46 SBC81613 Socket 370 All-in-One CPU Card Series User’s Manual When you enter the Setup utility, the Main Menu screen will appear on the screen. The Main Menu allows you to select from various setup functions and exit choices. Phoenix – AwardBIOS CMOS Setup Utility...

  • Page 47: Standard Cmos Setup

    SBC81613 Socket 370 All-in-One CPU Card Series User’s Manual Standard CMOS Setup “Standard CMOS Setup” allows you to record some basic hardware configurations in your computer system and set the system clock and error handling. If the motherboard is already installed in a working system, you will not need to select this option.
  • Page 48 SBC81613 Socket 370 All-in-One CPU Card Series User’s Manual <F1> key. It will display the relevant information to help you. The memory display at the lower right-hand side of the menu is read-only. It will adjust automatically according to the memory changed.
  • Page 49 SBC81613 Socket 370 All-in-One CPU Card Series User’s Manual hard disk type or type the number and press <Enter>. Note that the specifications of your drive must match with the drive table. The hard disk will not work properly if you enter improper information within this category.
  • Page 50 SBC81613 Socket 370 All-in-One CPU Card Series User’s Manual LCD Type The category identifies the type of LCD installed in the computer. LCD Type VGA BIOS Default 640x480 800x600 LVDS 1024x768 1280x1024 640x480 DSTN 800x600 DSTN 1024x768 DSTN 1280x1024 DSTN...
  • Page 51 SBC81613 Socket 370 All-in-One CPU Card Series User’s Manual If you select Default, this option is useless and follows the VGA BIOS settings. The available options are CRT Only, LCD Only, Both, and Default. Display Type After POST This item configures the viewing area for the POST sequence.

  • Page 52: Advanced Bios Features Setup

    SBC81613 Socket 370 All-in-One CPU Card Series User’s Manual Advanced BIOS Features Setup This section allows you to configure and improve your system and allows you to set up some system features according to your preference. Phoenix – AwardBIOS CMOS Setup Utility...
  • Page 53 SBC81613 Socket 370 All-in-One CPU Card Series User’s Manual occurs, you can either allow the operation to continue or run an anti-virus program to locate and remove the problem. NOTE: Many disk diagnostic programs, which attempt to access the boot sector table, can cause the virus warning. If you will run such a program, disable the Virus Warning feature.
  • Page 54 SBC81613 Socket 370 All-in-One CPU Card Series User’s Manual This item allows the user to select the LAN boot ROM support LAN1 or LAN2. Optimized Default Select This item allows the user to select the Load Optimized Default is load bios default or optimized default.
  • Page 55 SBC81613 Socket 370 All-in-One CPU Card Series User’s Manual Security Option If you have set a password, select whether the password is required every time the System boots, or only when you enter Setup. OS Select for DRAM > 64MB...

  • Page 56: Chipset Features Setup

    SBC81613 Socket 370 All-in-One CPU Card Series User’s Manual Chipset Features Setup This Setup menu controls the configuration of the motherboard chipset. Phoenix – AwardBIOS COMS Setup Utility Advanced Chipset Features [Enabled] DRAM Timing By SPD Item Help [Host CLK]...
  • Page 57 SBC81613 Socket 370 All-in-One CPU Card Series User’s Manual DRAM Cycle Length When synchronous DRAM is installed, the number of clock cycles of CAS latency depends on the DRAM timing. Do not reset this field from the default value specified by the system designer.
  • Page 58 SBC81613 Socket 370 All-in-One CPU Card Series User’s Manual Onchip sound The SBC81613 support AC97 audio. CPU-To-PCI Write Buffer When it was enabled, the CPU can write up to four dwords of data to the PCI write buffer before the CPU must wait for the PCI bus cycles to finish.

  • Page 59: Integrated Peripherals

    SBC81613 Socket 370 All-in-One CPU Card Series User’s Manual Integrated Peripherals This option sets your hard disk configuration, mode and port. Phoenix – AwardBIOS COMS Setup Utility Integrated Peripherals [Enabled] OnChip IDE Channel0 Item Help OnChip IDE Channel1 [Enabled] IDE Prefetch Mode...
  • Page 60 SBC81613 Socket 370 All-in-One CPU Card Series User’s Manual for faster drive accesses. If you install a primary and/or secondary add-in IDE interface, set this field to Disabled if the interface does not support prefetching. Primary/Secondary Master/Slave PIO The four IDE PIO (Programmed Input/Output) fields let you set a PIO mode (0-4) for each of the four IDE devices that the onboard IDE interface supports.
  • Page 61 SBC81613 Socket 370 All-in-One CPU Card Series User’s Manual IrDA ASKIR IrDA-compliant serial infrared port Normal (default value) NOTE: The UART Mode Select will not appear on the menu once you disable the setting of Onboard Serial Port 2. When UART Mode Select is set as ASKIR or IrDA, the options RxD, TxD Active and IR Transmittion delay will appear.

  • Page 62: Power Management Setup

    SBC81613 Socket 370 All-in-One CPU Card Series User’s Manual SB IRQ Select The item allows you to select IRQ No. for Sound Blaster. SB DMA Select The item allows you to select DMA Channel for Sound Blaster. Power Management Setup The Power Management Setup allows you to save energy of your system effectively.
  • Page 63 SBC81613 Socket 370 All-in-One CPU Card Series User’s Manual No power management. Disables all four Disable (default) modes Minimum power management. Doze Mode = Min. Power 1 hr. Standby Mode = 1 hr., Suspend Mode Saving = 1 hr., and HDD Power Down = 15 min.
  • Page 64 SBC81613 Socket 370 All-in-One CPU Card Series User’s Manual always awakens the system. The available choices are 3, 4, 5, 7, 9, 10, 11, and NA. By default, the IRQ is set to 3. Soft-off by PWRBTN This only works with systems using an ATX power supply. It also allows tser to define the type of soft power OFF sequence the system will follow.

  • Page 65: Pnp/Pci Configurations

    SBC81613 Socket 370 All-in-One CPU Card Series User’s Manual PnP/PCI Configurations This option configures the PCI bus system. All PCI bus systems on the system use INT#, thus all installed PCI cards must be set to this value. Phoenix – AwardBIOS COMS Setup Utility...

  • Page 66: Pc Health Status

    SBC81613 Socket 370 All-in-One CPU Card Series User’s Manual When resources are controlled manually, assign each system interrupt as one of the following types, depending on the type of device using the interrupt: 1. Legacy ISA Devices compliant with the original PC AT bus specification, requiring a specific interrupt (such as IRQ4 for serial port 1).
  • Page 67 SBC81613 Socket 370 All-in-One CPU Card Series User’s Manual Phoenix – AwardBIOS COMS Setup Utility PC Health Status Current CPU Temp. Item Help Current System Temp. Vcore Menu Level 3.3V : Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help...

  • Page 68: Frequency/Voltage Control

    SBC81613 Socket 370 All-in-One CPU Card Series User’s Manual 7.10 Frequency/Voltage Control This option configures the PCI bus system. All PCI bus systems on the system use INT#, thus all installed PCI cards must be set to this value. Phoenix – AwardBIOS COMS Setup Utility...

  • Page 69: Load Optimized Defaults

    SBC81613 Socket 370 All-in-One CPU Card Series User’s Manual 7.11 Load Optimized Defaults This option allows you to load the default values to your system configuration. These default settings are optimal and enable all high performance features. Phoenix – AwardBIOS COMS Setup Utility...
  • Page 70 SBC81613 Socket 370 All-in-One CPU Card Series User’s Manual To disable a password, just press the <Enter> key when you are prompted to enter the password. A message will confirm the password to be disabled. Once the password is disabled, the system will boot and you can enter Setup freely.

  • Page 71: Save & Exit Setup

    SBC81613 Socket 370 All-in-One CPU Card Series User’s Manual 7.13 Save & Exit Setup This allows you to determine whether or not to accept the modifications. Typing “Y” quits the setup utility and saves all changes into the CMOS memory. Typing “N” brigs you back to Setup utility.

  • Page 72: Exit Without Saving

    SBC81613 Socket 370 All-in-One CPU Card Series User’s Manual 7.14 Exit Without Saving Select this option to exit the Setup utility without saving the changes you have made in this session. Typing “Y” will quit the Setup utility without saving the modifications. Typing “N” will return you to Setup utility.

  • Page 73: Appendix A Watchdog Timer

    A p p e n d i x A Watchdog Timer Using the Watchdog Function The SBC81613 Series CPU card uses version 2.0 of the watchdog timer. This onboard WDT generates either a system reset or non-maskable interrupt (NMI), depending on the settings made on jumper JP10 of SBC81613 Series.
  • Page 74 SBC81613 Socket 370 All-in-One CPU Card Series User’s Manual 0.5 sec. 5 secs. 50 secs. 100 secs. 1 sec. 10 secs. 100 secs. 200 secs. 1.5 secs. 15 secs. 150 secs. 300 secs. 2 secs. 20 secs. 200 secs. 400 secs.

  • Page 75: Appendix B Pci Irq Rounting

    SBC81613 Socket 370 All-in-One CPU Card Series User’s Manual A p p e n d i x B PCI IRQ Rounting PICMG PCI IRQ Routing Device Slot PCI Slot 0 BCDA PCI Slot 1 CDAB PCI Slot 2 DABC PCI Slot 3...

Table of Contents