IMB202 LGA775 ATX Board User's Manual
HPET Mode
Use this item to configure the HPET (High Precision Event Timer)
mode.
Press <Esc> to return to the Main Menu page.
5.10 PnP/PCI Configuration Setup
This section describes the configuration of PCI (Personal Computer
Interconnect) bus system, which allows I/O devices to operate at
speeds close to the CPU speed while communicating with other
important components. This section covers very technical items that
only experienced users could change default settings.
Init Display First
This item allows you to decide whether PCI Slot or AGP to be the
first primary display card.
Reset Configuration Data
Normally, you leave this item Disabled. Select Enabled to reset
Extended System Configuration Data (ESCD) when you exit Setup
or if installing a new add-on cause the system reconfiguration a
48
Phoenix-Award BIOS Utility