Commands For Setting Camera Parameters; Video Data Output Mode - Basler L100k User Manual

4.2.4 Commands for Setting Camera Parameters

4.2.4.1 Video Data Output Mode

Purpose: To set the video data output mode or to read the current video data output mode setting. See
Section 2.5.5 for an explanation of the available video data output modes.
Type: This is a read or write command.
Read Command:
Response:
Write Command:
Response:
Data Format:
BASLER L100
k Series
DRAFT
Cmd-ID R/W-Flag
0xC0 1
Cmd-ID R/W-Flag
0xC0 0
Cmd-ID R/W-Flag
0xC0 0
None
Byte 1 An ID that specifies the data output mode
(see the table below).
ID Output Mode
0x00 Single 8 Bit mode
0x01 Dual 8 Bit mode
0x02 Single 10 Bit mode
0x03 Dual 10 Bit mode
Configuring the Camera
Data Length Data
1
Data Length Data
1 1 Byte
Data Length Data
1 1 Byte
-
4-11