Shading Correction Data - Basler L100k User Manual

Configuring the Camera

4.2.4.10 Shading Correction Data

Purpose: To write the shading correction data to the camera or read the current correction data. See
Section 3.6 for more information on shading correction.
Note: Before writing shading data to the camera, you must use a 0x68 command to open
the camera registers for writing.
Type: This is a read or write command.
Read Command:
Response:
Write Command:
Response:
Data Format:
4-20
DRAFT
Cmd-ID R/W-Flag
0x69 1
Cmd-ID R/W-Flag
0x69 0
Cmd-ID R/W-Flag
0x69 0
None
Byte 1 Multiplier of first pixel in the addressed section of pixels.
Byte 2 Multiplier of second pixel in the addressed section of pixels.
...
Byte 58 Multiplier of 58th pixel in the addressed section of pixels.
Data Length Data
1 to 58
Data Length Data
1 to 58 1 to 58 Bytes
Data Length Data
1 to 58 1 to 58 Bytes
BASLER L100
-
k Series