Area Of Interest Length In Pixels - Basler L100k User Manual

4.2.4.7 Area of Interest Length in Pixels

Purpose: To set the length in pixels for the Area of Interest or to read the current length setting. See
Section 3.8 for details.
Type: This is a read or write command.
Read Command:
Response:
Write Command:
Response:
Data Format:
Data Range:
BASLER L100
k Series
DRAFT
Cmd-ID R/W-Flag
0xAB 1
Cmd-ID R/W-Flag
0xAB 0
Cmd-ID R/W-Flag
0xAB 0
None
Byte 1 Low byte of the length in pixel setting
Byte 2 High byte of the length in pixel setting
1K sensors: 1 (0x0001) to 1024 (0x0400)
2K sensors: 1 (0x0001) to 2048 (0x0800)
Configuring the Camera
Data Length Data
2
Data Length Data
2 2 Bytes
Data Length Data
2 2 Bytes
-
4-17