Even Pixel Gain; Even Pixel Offset - Basler L100k User Manual

Configuring the Camera

4.2.4.13 Even Pixel Gain

Purpose: To set the gain for the even pixels or to read the current even pixel gain setting. See Section
3.5 for more information on gain.
Type: This is a read or write command.
Read Command:
Response:
Write Command:
Response:
Data Format:
Data Range:

4.2.4.14 Even Pixel Offset

Purpose: To set the offset for the even pixels or to read the current even pixel offset setting. See
Section 3.5 for more information on offset.
Type: This is a read or write command.
Read Command:
Response:
Write Command:
Response:
Data Format:
Data Range:
4-22
DRAFT
Cmd-ID R/W-Flag
0x82 1
Cmd-ID R/W-Flag
0x82 0
Cmd-ID R/W-Flag
0x82 0
None
Byte 1 Low byte of even pixel gain setting
Byte 2 High byte of even pixel gain setting
L101k, L103k: 0 (0x0000) to 1023 (0x03FF)
L104k: 0 (0x0000) to 319 (0x013F)
Cmd-ID R/W-Flag
0x86 1
Cmd-ID R/W-Flag
0x86 0
Cmd-ID R/W-Flag
0x86 0
None
Byte 1 Low byte of even pixel offset setting
Byte 2 High byte of even pixel offset setting
L101k, L103k: 0 (0x0000) to 255 (0x00FF)
L104k: 0 (0x0000) to 1023 (0x03FF)
Data Length Data
2
Data Length Data
2 2 Bytes
Data Length Data
2 2 Bytes
Data Length Data
2
Data Length Data
2 2 Bytes
Data Length Data
2 2 Bytes
BASLER L100
-
-
k Series