Read Microcontroller Firmware Version; Read Fpga Firmware Version - Basler L100k User Manual

4.2.7.7 Read Microcontroller Firmware Version

Purpose: To read the microcontroller firmware version
Type: This is a read only command.
Read Command:
Response:
Data Format:

4.2.7.8 Read FPGA Firmware Version

Purpose: To read the FPGA firmware version
Type: This is a read only command.
Read Command:
Response:
Data Format:
BASLER L100
k Series
DRAFT
Cmd-ID R/W-Flag
0x40 1
Cmd-ID R/W-Flag
0x40 0
Byte 1 Low byte of firmware version
Byte 2 High byte of firmware version
Byte 3 Protocol Version
Cmd-ID R/W-Flag
0x41 1
Cmd-ID R/W-Flag
0x41 0
Byte 1 Low byte of firmware version
Byte 2 High byte of firmware version
Byte 3 undefined - 0x00 is always used
Configuring the Camera
Data Length Data
3
Data Length Data
3 3 Bytes
BCD coded
BCD coded
Data Length Data
3
Data Length Data
3 3 Bytes
BCD coded
BCD coded
-
-
4-27