Shading Correction - Basler L100k User Manual

Configuring the Camera

4.2.4.8 Shading Correction

Purpose: To enable or disable shading correction or the shading correction test image mode. See
Section 3.6 for more information on shading correction.
Type: This is a read or write command.
Read Command:
Response:
Write Command:
Response:
Data Format:
4-18
DRAFT
Cmd-ID R/W-Flag
0xC5 1
Cmd-ID R/W-Flag
0xC5 0
Cmd-ID R/W-Flag
0xC5 0
None
Byte 1 An ID that specifies the data output mode
(see the table below).
ID Output Mode
0x00 Shading correction off
0x01 Output shading correction data as a test image
0x02 Shading correction on
Data Length Data
1
Data Length Data
1 1 Byte
Data Length Data
1 1 Byte
BASLER L100
-
k Series