Tools For Changing Camera Parameters; The Pylon Viewer; The Ip Configuration Tool - Basler Pioneer User Manual

Tools for Changing Camera Parameters

3 Tools for Changing Camera
Parameters
This section explains the options available for changing the camera's parameters. The available
options let you change parameters either by using standalone tools that access the camera via a
GUI or by accessing the camera from within your software application.

3.1 The pylon Viewer

The Basler pylon Viewer is a standalone application that lets you view and change most of the
camera's parameter settings via a GUI based interface. The viewer also lets you acquire images,
display them, and save them. Using The pylon Viewer software is a very convenient way to get your
camera up and running quickly when you are doing your initial camera evaluation or doing a camera
design-in for a new project.
The pylon Viewer is included in the pylon Software Development Kit and is also included in the
freely available pylon run-time software package.
For more information about using the viewer, see Section 2.4 on page 40.

3.2 The IP Configuration Tool

The Basler IP Configuration Tool is a standalone application that lets you change the IP
configuration of the camera via a GUI. The tool will detect all Basler GigE cameras attached to your
network and let you make changes to a selected camera
The IP Configuration Tool is included in the pylon Software Development Kit and is also included in
the freely available pylon run-time software package.
For more information about using the IP Configuration Tool, see Section 5.4 on page 69.
Basler pioneer 51