The Shading Data Test Image - Basler L100k User Manual

DRAFT
Operation and Features

3.6.4 The Shading Data Test Image

cameras offer a "shading data" test image. When the camera is operating in this mode, it
L100
k
outputs the values in the shading correction table as though they were a line of image data. If you
place the camera in the shading data test image mode and you capture a line, you can examine
the values in the captured line to see what is stored in the shading correction table.
The shading data test image can be enabled using either the Camera Configuration Tool Plus (see
Section 4.1) or binary commands (see Section 4.2).
With the Camera Configuration Tool Plus, you use the Shading Correction setting in the Output
parameter group to enable this mode.
With binary commands, you use the Shading Correction command (see Section 4.2.4.8).
BASLER L100
3-23
k Series