2 Camera Interface
2.1 Connections
2.1.1 General Description
series cameras are interfaced to external circuitry via two connectors located on the back
L100
k
of the camera:
• a 26 pin, .050" Mini D Ribbon (MDR) female connector used to transmit video data, control
data, and configuration data,
• a 6 pin, micro-miniature, push-pull receptacle used to provide power to the camera.
A status LED located on the back of the camera is used to indicate power present and signal
integrity. Figure 2-1 shows the connectors and the LED.
LED
Figure 2-1: L100
BASLER L100
k Series
DRAFT
Connectors and LED
k
Camera Interface
Micro-miniature
6 Pin Receptacle
26 Pin Female
MDR Connector
2-1