Precautions - Basler L100k User Manual

Introduction

1.4 Precautions

Power
Do not remove the camera's serial number label
If the label is removed and the serial number can't be read from the camera's registers, the
warranty is void.
Read the manual
Read the manual carefully before using the camera.
Keep foreign matter outside of the camera
Do not open the casing. Touching internal components may damage them.
Be careful not to allow liquid, flammable, or metallic material inside the camera housing. If
operated with any foreign matter inside, the camera may fail or cause a fire.
Electromagnetic Fields
Do not operate the camera in the vicinity of strong electromagnetic fields. Avoid electrostatic
charging.
Transporting
Only transport the camera in its original packaging. Do not discard the packaging.
Cleaning
Avoid cleaning the surface of the CCD sensor if possible. If you must clean it, use a soft, lint free
cloth dampened with a small quantity of pure alcohol. Do not use methylated alcohol.
Because electrostatic discharge can damage the CCD sensor, you must use a cloth that will not
generate static during cleaning (cotton is a good choice).
1-4
DRAFT
Caution!
Be sure that all power to your system is switched off before you make or break
connections to the camera. Making or breaking connections when power is on
can result in damage to the camera.
Caution!
The camera has no overvoltage protection. An input voltage higher than
14 VDC will damage the camera.
Caution!
Do not reverse the polarity of the input power to the camera. Reversing the
polarity of the input power can severely damage the camera and leave it non-
operational.
BASLER L100
k Series