Odd Pixel Gain; Odd Pixel Offset - Basler L100k User Manual

4.2.4.11 Odd Pixel Gain

Purpose: To set the gain for the odd pixels or to read the current odd pixel gain setting. See Section
3.5 for more information on gain.
Type: This is a read or write command.
Read Command:
Response:
Write Command:
Response:
Data Format:
Data Range:

4.2.4.12 Odd Pixel Offset

Purpose: To set the offset for the odd pixels or to read the current odd pixel offset setting. See Section
3.5 for more information on offset.
Type: This is a read or write command.
Read Command:
Response:
Write Command:
Response:
Data Format:
Data Range:
BASLER L100
k Series
DRAFT
Cmd-ID R/W-Flag
0x80 1
Cmd-ID R/W-Flag
0x80 0
Cmd-ID R/W-Flag
0x80 0
None
Byte 1 Low byte of odd pixel gain setting
Byte 2 High byte of odd pixel gain setting
L101k, L103k: 0 (0x0000) to 1023 (0x03FF)
L104k: 0 (0x0000) to 319 (0x013F)
Cmd-ID R/W-Flag
0x84 1
Cmd-ID R/W-Flag
0x84 0
Cmd-ID R/W-Flag
0x84 0
None
Byte 1 Low byte of odd pixel offset setting
Byte 2 High byte of odd pixel offset setting
L101k, L103k: 0 (0x0000) to 255 (0x00FF)
L104k: 0 (0x0000) to 1023 (0x03FF)
Configuring the Camera
Data Length Data
2
Data Length Data
2 2 Bytes
Data Length Data
2 2 Bytes
Data Length Data
2
Data Length Data
2 2 Bytes
Data Length Data
2 2 Bytes
-
-
4-21