Revision History - Basler L100k User Manual

Revision History

Doc. ID Number Date
DA0005090a 5-October-2001
DA00050901 23-October-2001
DA00050902 14-October-2002
DA00050903 20-March-2003
DA00050904 29-June-2007
DA00050905 8-April-2008
BASLER L100
k Series
DRAFT
Changes
First draft of release covering series production cameras.
Initial release covering series production cameras.
Corrected the connector information in Section 1.2.
Updated the Camera Link cable information in Section 2.2.1.
Added more details to the Shading Correction description in Sect. 3.6.3.
Added a description of the Camera Temperature feature (Sect. 3.11).
Revised the troubleshooting chart in Sect. 6.2.1.
Revised the stated maximum line rates in Section 1.2.
Updated the pixel timing charts in Section 2.5.5 and the timing numbers
in Sections 3.2.1.2 and 3.2.2.2 to reflect revisions made to the sensor
timing by the manufacturer.
Made revisions throughout to include instructions for using the Camera
Configuration Tool Plus (CCT+).
Updated Singapore and U.S. addresses.
Increased weight of the camera with C-mount adapter to 220 g in
Section 1.2.
Added environmental requirements for storage in Section 1.3.
Added warning against overvoltage in Section 1.4.
Added warnings not to reverse polarity of input power in Sections 1.4
and 2.8.
Corrected type of power connector in Section 2.1.3.
Modified Figure 2-3 in Section 2.3.
Removed step 4 and added to note box in Section 4.2.10.
Corrected "Data", "Byte 1", and "Byte 2" in Section 4.2.6.
Added Section 6.3.
Added feedback section.
Added a warning to Section 1.4 advising users not to remove the serial
number label.
Corrected the connector part number in Section 2.1.3.
Corrected vertical and rotational positioning accuracy in Section 5.4.
Added drawing in Figure 5-4 in Section 5.4 showing the relative posi-
tions of sensor housing and photosensitive area.
Revision History
i