Configuring The Camera - Basler L100k User Manual

4 Configuring the Camera

L100 series cameras come factory-set so that they will work properly for most applications with
k
minor changes to the camera configuration. For normal operation, the following parameters are
usually configured by the user:
• Exposure time control mode
• Exposure time (for ExSync programmable mode or free-run programmable mode)
To customize operation for your particular application, the following parameters can also be
configured:
• Gain
• Offset
• Shading Correction
• Area of Interest
• Digital Shift
series cameras are programmable via the serial port on the frame grabber. Two methods
L100
k
can be used to change the cameras's settings. The first and easier approach is to change the
settings using the Camera Configuration Tool Plus. See Section 4.1 and the configuration tool's
on-line help file for instructions on using the configuration tool. You can also change the camera's
settings directly from your application using binary commands. Section 4.2 lists the binary
commands and provides instructions for their use.
BASLER L100
k Series
DRAFT
Configuring the Camera
4-1