Commands For Setting Camera Parameters; Video Data Output Mode - Basler A102k User Manual

4.2.4 Commands for Setting Camera Parameters

4.2.4.1 Video Data Output Mode

Purpose: To set the video data output mode or to read the current video data output mode setting. See
Sections
Type: This is a read or write command.
Read Command:
Response:
Write Command:
Response:
Data Format:
BASLER A102
k
DRAFT
2.5.5.2 for an explanation of the available video data output modes.
Cmd-ID R/W-Flag
0xC0
Cmd-ID R/W-Flag
0xC0
Cmd-ID R/W-Flag
0xC0
None
Byte 1 An ID that specifies the data output mode
(see the table below).
ID Output Mode
0x00 Single 8 bit mode
0x02 Single 10 bit mode
0x04 Single 12 bit mode
0x08 3 x 8 bit RGB mode
Data Length
1 1
Data Length
0 1
Data Length
0 1
Configuring the Camera
Data
-
Data
1 Byte
Data
1 Byte
4-11