Exposure Time Control Mode - Basler L100k User Manual

Configuring the Camera

4.2.4.2 Exposure Time Control Mode

Purpose: To set the exposure time control mode or to read the current exposure time control mode
setting. See Section 3.2 for an explanation of exposure time control modes.
Type: This is a read or write command.
Read Command:
Response:
Write Command:
Response:
Data Format:
4-12
DRAFT
Cmd-ID R/W-Flag
0xA0 1
Cmd-ID R/W-Flag
0xA0 0
Cmd-ID R/W-Flag
0xA0 0
None
Byte 1 An ID that specifies the exposure mode
(see the table below).
ID Exposure Time Control Mode
0x00 Free-run, Programmable
0x02 Free-run, Edge-controlled
0x04 ExSync, Level-controlled
0x05 ExSync, Programmable
0x06 ExSync, Edge-controlled
Data Length Data
1
Data Length Data
1 1 Byte
Data Length Data
1 1 Byte
BASLER L100
-
k Series