Attachment Of Front Cover Assy - Brother CE-5500PRW Service Manual

Basics of Assembly
1

Attachment of Front cover assy

1. Lower the presser lever 1.
2. Connect the connectors of the SSVR PCB assy. 2 and the operation PCB
sub assy. 3 to the main PCB assy. 4, and hang the lead wire on the guide
part of the shutter cover 5.
*Key point
• Refer to "Special Instructions of Wiring".
3. Set the front cover assy. to the rear cover assy., and then secure them with
the screw 1 (from the front cover side) and the 2 screws 2, the 5 screws
3 and the screw 4 (from the rear cover side).
→ Refer to 3 - 47 "Assembly of Front cover assy".
1
2
3
4
2 - 30
Main parts
Giza Tite
M4X12
Giza Tite
M4X25
Giza Tite
M5X18
Screw, Pan (S/P washer)
M4X8
1
Torque
0.78 – 1.18 N·m
Torque
0.78 – 1.18 N·m
Torque
1.18 – 1.57 N·m
Torque
0.78 – 1.18 N·m
1
3 2
4
2 4
3
5