Handle Assembly And Attachment - Brother PE770 Service Manual

Main unit
1

Handle assembly and attachment

1. Attach the handle, handle holder and polyester slider to the handle shafts,
and attach 2 retaining rings E4.
2. Attach the handle to the arm bed using the 2 screws 1.
1
2
Rear cover attachment
1. Lower the presser lever 1.
2. Attach the rear cover, being careful to avoid the switch 2 being caught in
section 3, and then attach the hook 4 to the base plate.
3. Attach the rear cover, being careful to avoid the presser lever 1 being
caught in section 5.
4. Secure the rear cover to the arm bed with the screw 1.
1
3 - 30
Main parts
Taptite, Bind S
M4X10
Screw, Bind
M4X8
Torque
1.47 — 1.96 N·m
4
Torque
0.78 — 1.18 N·m
Retaining ring E4
1
5
1 1
2
3