Needle Bar Supporter Assy. Removal - Brother NX600 Service Manual

Modules
15

Needle bar supporter assy. removal

1. Remove the screw 1, and remove the plate 1.
2. Remove the screw 2, and remove the shaft 2.
3. Remove the shaft 3.
4. Remove the needle bar supporter assy. 4.
*Key point
• Move the Z zigzag lever assy. to the right.
Start movie clip (CD-ROM version only)
16
Hook release plate removal
1. Remove the screw 1, and detach the hook release plate 1.
17
Threader hook assy. disassembly
1. Remove the thread guide assy., threader hook assy., link A assy., and link
B.
Start movie clip (CD-ROM version only)
18
Lever AB assy. removal
1. Remove retaining ring E2.
2. Remove the screw 1, and remove the lever guide shaft 1, lever presser
plate 2 and lever AB assy. 3.
3. Remove retaining ring E2 from the lever guide shaft 1.
Start movie clip (CD-ROM version only)
2 - 38
Needle-presser module
2 1 1
2
3 4
1
1
Retaining ring E2
1 1 2
3