Needle Bar Case Final Assembly Removal; Change Roller Base Assembly Removal; Case Guide D Removal - Brother PR600 Service Manual

Main unit
1

Needle bar case final assembly removal

1. Remove the 4 screws 1, and then remove the needle bar case assembly.
Start movie clip (CD-ROM version only)
2

Change roller base assembly removal

1. Remove the 2 screws 1, and then remove the change roller base assembly.
3

Case guide D removal

1. Remove the 2 screws 1, and then remove the case guide D.
Needle bar unit
1
1
1
2 - 37