Application of Assembly
1
Assembly of Rear cover assy
1-1 Attachment of Thread guide assy
1. Set the thread guide assy 1 to the rear cover assy, and then tighten the
screw 1 temporarily.
*Key point
• Fully tighten the screw 1 after performing
Bobbin
winder".
1
1-2 Attachment of Bobbin presser
1. Set the bobbin presser 1 to the rear cover assy, and then tighten the screw
1 temporarily.
*Key point
• Place the bobbin presser 1 with the smaller end facing the
rear.
• Fully tighten the screw 1 after performing
Bobbin
winder".
1
1-3 Attachment of Spool pin
1. Set the spool pin spring 1 to the positioning groove of the rear cover assy.
2. Insert the spool pin 2 into the positioning hole of the rear cover assy while
pulling the spool pin spring 1.
Main frame and Covers
"4-41 Adjustment:
Taptite, Bind B
M4X10
"4-41 Adjustment:
Taptite, Pan P (S/P W)
M3X12
3 - 79
1
1
1
1
2
1
2