8.3.4
Ethernet setting
Item
Description
The host is displayed.(The host is
Host
indicated with an asterisk (*).)
Set the network No. of the
N/W No.
connected Ethernet module.
(Default: blank)
Set the station No. of the
*1
connected Ethernet module.
Station
(Default: blank)
Type
SLMP (fixed)
Set the IP address of the
IP Address
connected Ethernet module.
(Default: blank)
Set the port number of the SLMP
Port No.
compatible device.
(Default: 49152)
Communication
UDP, TCP
format
(Default: UDP)
*1
Each of [GOT Station] set in the communication detail setting
and [Station] set in the Ethernet setting must be set to
different station numbers.
8.3.2 Communication detail settings
8 - 6
8. SLMP CONNECTION
8.3 GOT Side Settings
POINT
POINT
POINT
Range
―
8.3.5
1 to 239
1 to 120
―
SLMP equipment
side IP address
1 to 65535
Adjust the setting
with the
communication
format of the
SLMP compatible
device.
To improve security, the GOT 2000 series supports the IP
Filter Setting.
For details on the IP Filter Setting, refer to the following
manual.
Changing the host with GOT module
The host can be changed by the GOT module Utility.
For details of settings, refer to the following.
GOT2000 Series User's Manual (Utility)
IP Filter Setting
GT Designer3 (GOT2000) Help