Precautions - Mitsubishi Electric GOT2000 Series Connection Manual

3.8 Precautions


GOT clock control
The settings of "time adjusting" or "time broadcast"
made on the GOT will be disabled on the PLC.
Use the dedicated commands to set or read out the
clock data of microcomputer.

UDP/IP connection
When the commands are sent from multiple controllers
simultaneously, the GOT may not receive all the
commands.
Retry sending the commands on the controller, to
receive them on the GOT again.

Station monitoring function
The microcomputer connection (Ethernet) does not
support the station monitoring function.

Interrupt output
The interrupt output is effective only at TCP/IP
connection.
At UDP/IP connection, the interrupt output is not
enabled.
3. MICROCOMPUTER CONNECTION (ETHERNET)
3 - 75
3.8 Precautions
3