4.3 Connection Diagram
The following diagram shows the connection between the GOT and the PLC.
(1) DeviceNet connection diagram 1)
DeviceNet master equipment
Power supply (V-)
Communication data Low side
(CAN_L)
Shield
Communication data High side
(CAN_H)
Power supply (V+)
*1
The power supply for communication (24 V DC) is required to supply the power to the power supply (V-) and power supply (V+).
Precautions when preparing a cable
(1) Cable length
For the Cable length, refer to the following.
4.2 System Configuration
(2) GOT side connector (DeviceNet slave equipment)
For the GOT side connector, refer to the following.
Manual of Anybus CompactCom M40 Network
Communication Module by HMS
(3) DeviceNet master equipment side connector
Use the connector compatible with the DeviceNet
master equipment side module.
For details, refer to the DeviceNet master equipment
user's manual.
4 - 4
4. DeviceNet CONNECTION
4.3 Connection Diagram
Cable color : Black
*1
1
Cable color : Blue
2
3
Cable color : White
4
Cable color : Red
5
*1
GOT side
(1st)
1
2
3
4
5
GOT side
(2nd)
power supply cable (V-)
1
Communication data Low side
2
(CAN_L)
Shield
3
Communication data High side
4
(CAN_H)
power supply cable (V+)
5