1.2 Writing the Package Data onto the GOT
Write the package data onto the GOT.
For details on writing to GOT, refer to the following manual.
1.2.1
Writing the Package Data onto the GOT
1.
Select [Communication]
2.
The [Communication configuration] dialog box appears.
Set the communication setting between the GOT and the personal computer.
Click the
button when settings are completed.
3.
The [GOT Write] tab appears on the [Communicate with GOT] dialog box.
Select the [Project data, OS] radio button of the Write Data.
4.
Check-mark a desired standard monitor OS, communication driver, extended function OS, and Communication
Settings and click the [GOT Write] button.
1 - 10
1. PREPARATORY PROCEDURES FOR MONITORING
1.2 Writing the Package Data onto the GOT
GT Designer3 (GOT2000) Help
[Write to GOT...] from the menu.