Mitsubishi Electric GOT2000 Series Connection Manual page 32


Setting item
The following describes the setting items for the standard I/F setting and extension I/F setting.
When the GT21 series is
selected in the GOT type setting
Item
Standard I/F setting
CH No.
I/F
Driver
Detail Setting
RS232
Setting
Extension I/F setting
CH No.
1 - 8
1. PREPARATORY PROCEDURES FOR MONITORING
1.1 Setting the Communication Interface
Set channel No. and drivers to the GOT standard interfaces.
Set the CH No. according to the intended purpose.
0: Not used
1 to 4: Used for connecting a controller of channel No. 1 to 4 set in Setting connected equipment (Channel
setting)
5 to 8: Used for barcode function, RFID function, remote personal computer operation function (serial)
9: Used for connecting Host (PC), Ethernet download
A: Used for the report function (with a serial printer), hard copy function (with a serial printer), remote personal
computer operation function (Ethernet), VNC server function, gateway function, and MES interface function.
Multi: Used for multi-channel Ethernet connection
The communication type of the GOT standard interface is displayed.
Set the driver for the device to be connected.
• None • Host (Personal computer) • Each communication driver for connected devices
Make settings for the transmission speed and data length of the communication driver.
Refer to each chapter of the equipment to be connected to the GOT.
To validate the 5V power supply function in RS232, mark the [Enable the 5V power supply] checkbox.
The RS232 setting is invalid when the CH No. of [I/F-1: RS232] is [9].
GT21 is not supported.
Set the communication unit attached to the extension interface of the GOT.
GT21 is not supported.
Set the CH No. according to the intended purpose.
The number of channels differs depending on the GOT to be used.
0: Not used
1 to 4: Used for connecting a controller of channel No. 1 to 4 set in Setting connected equipment (Channel
setting)
5 to 8: Used for barcode function, RFID function, remote personal computer operation (serial)
A: Used for the video/RGB display function, multimedia function, external I/O function, operation panel function,
RGB output function, report function, hard copy function (with a printer), sound output function, gateway
function, MES interface function, and wireless LAN connection.
Description