Mitsubishi Electric GOT2000 Series Connection Manual page 48

POINT POINT POINT
Utility
(1) How to display Utility (at default)
Utility call key
1-point press on GOT screen
upper-left corner
(2) Utility call
When setting [Pressing time] to other than 0 second on the setting screen of the utility call key, press and hold
the utility call key until the buzzer sounds. For the setting of the utility call key, refer to the following.
(3) Communication interface setting by the Utility
The communication interface setting can be changed on the Utility's [Communication setting] after writing
[Communication Settings] of project data.
For details on the Utility, refer to the following manual.
(4) Precedence in communication settings
When settings are made by GT Designer3 or the Utility, the latest setting is effective.
1 - 24
1. PREPARATORY PROCEDURES FOR MONITORING
1.5 Verifying GOT Recognizes Connected Equipment
GOT2000 Series User's Manual (Utility)
GOT2000 Series User's Manual (Utility)
Utility display