Precautions - Mitsubishi Electric GOT2000 Series Connection Manual

18.4 Precautions


RFID function setting on GT Designer3
Before connecting the RFID controller, set the RFID
function and system data.
For details, refer to the following manual.
GT Designer3 (GOT2000) Help

Controller setting
(1) When using the external authentication
When using the external authentication on the RFID
controller, set Channel No. 8 using the standard
interface.
When connecting the RFID using Channels No. 5 to 7
of the extension interface, extension interface cannot
be used.
For details on the external authentication, refer to the
following manual.
GT Designer3 (GOT2000) Help
(2) When requiring the power supply
When using the RFID controller, which requires the
power supply from the GOT, set Channel No. 8 using
the standard interface.
With Channels No. 5 to 7 of the extension interface, the
power cannot be supplied.

Communication in multiple RFID readers/
writers connection
When connecting multiple RFID readers/writers, some
controllers may communicate with each RFID reader/
writer.
For communicating the RFID controller with the each
RFID reader/writer, set an interlock so that the RFID
controller does not communicate with RFID readers/
writers until the executing communication is completed.
18 - 6
18. RFID CONNECTION
18.4 Precautions