Mitsubishi Electric GOT2000 Series Connection Manual page 313

Bar code Communication Connection
reader Type cable 1)
*1 RS-422/485 *1
*1 For connectable bar code readers, system equipment, available bar code types and connection cables, refer to the following
Technical News.
*2 When a GT10-C02H-6PT9P unit of the sub version A or B is used, do not ground the case of the D-sub (9-pin) connector.
POINT POINT POINT
When using the RS-232 communication unit
Use the RS-232 communication unit of the GOT for connecting to a barcode reader.
However, when the RS-232 communication unit is used, the power cannot be supplied to a bar code reader from
the GOT.
HINT HINT HINT
System configuration between the GOT and PLC
For the system configuration between the GOT and PLC, refer to each chapter.
Mitsubishi Products
Non-Mitsubishi Products 1, Non-Mitsubishi Products 2
Microcomputer, MODBUS Products, Peripherals
Connection cable 2)
-
-
-
-
List of valid devices applicable for GOT2000 series (GOT-A-0064)
GOT
Option device Model
- (Built into GOT)
GT15-RS4-9S
GT15-RS4-TE
- (Built into GOT)
11. BAR CODE READER CONNECTION
11.2 System Configuration
Number of
PLC
connectable
equipment
For the system
configuration between 1 bar code reader
the GOT and PLC, for 1 GOT
refer to each chapter.
11 - 3
11