Got Side Settings; Install And Setting The Required Software; Precautions; System Configuration - Mitsubishi Electric GOT2000 Series Connection Manual

12.3.2 GOT Side Settings


Setting communication interface
(Communication settings)
(1) When using the Ethernet connection cable
Set the channel of the equipment to be connected to
the GOT.
2.
1.
Select [Common]
menu.
2.
The Controller Setting window is displayed. Select the
channel to be used from the list menu.
3.
Set Manufacturer, Controller Type, I/F, and Driver
according to the connected equipment to be used.
4.
The detailed setting is displayed after Manufacturer,
Controller Type, I/F, and Driver are set.
Make the settings according to the usage
environment.
Click the [OK] button when settings are completed.
POINT POINT POINT
The settings of connecting equipment can be set and
confirmed in [I/F Communication Setting]. For details,
refer to the following.
1.1.2 I/F communication setting
(2) When using the wireless LAN
For details of the wireless LAN setting, refer to the
following.
19. WIRELESS LAN CONNECTION
12 - 10
12. PC REMOTE CONNECTION
12.3 Ethernet Connection
Click!
[Controller Setting] from the

Settings for the PC remote operation
3.
4.
1.
Select [Common]
Remote Operation] from the menu.
2.
Set [Connecting I/F] of [PC Remote Operation] to
[Disconnect].
3.
Check the [Use PC Remote Operation (Ethernet)] of
[PC Remote Operation (Ethernet)] to set. For details
on the settings, refer to the following manual.
GT Designer3 (GOT2000) Help
Click the [OK] button when settings are completed.
12.3.3 Install and setting the required
Install and set the required software according to the

system configuration.

For the settings, refer to the following manual.
GT Designer3 (GOT2000) Help

12.3.4 Precautions


Ethernet system driver
Before using the PC remote operation function
(Ethernet), install an Ethernet system communication
driver to the GOT.
Set the Ethernet system communication driver for the
controller setting or peripheral setting.
For the settings, refer to the following manual.
GT Designer3 (GOT2000) Help
3.
2.
[Peripheral Setting]
software
Click!
[PC