Download  Print this page

Vnc(r) Server Function Setting; Setting Communication Interface (communication Settings) - Mitsubishi Electric GOT2000 Series Connection Manual

Graphic operation terminal microcomputers, modbus/fieldbus products, peripherals.
Hide thumbs

Advertisement

14.3 GOT Side Settings

14.3.1 VNC(R) server function setting

2.
1.
Select [Common]
Server] from the menu.
2.
Check the [VNC Server] of [Use VNC Server] to set.
For details on the settings, refer to the following
manual.
GT Designer3 (GOT2000) Help
3.
Click the [OK] button when settings are completed.
14 - 4
14. VNC(R) SERVER CONNECTION
14.3 GOT Side Settings
Click!
[Peripheral Setting]
[VNC
14.3.2 Setting communication
interface (Communication
settings)
When using the Ethernet connection cable
®
For using the VNC
server, Ethernet
communication drivers must be set on the GOT,
and set the Communication settings
2.
1.
Select [Common]
menu.
2.
The Controller Setting window is displayed. Select the
channel to be used from the list menu.
3.
Set Manufacturer, Controller Type, I/F, and Driver
according to the connected equipment to be used.
4.
The detailed setting is displayed after Manufacturer,
Controller Type, I/F, and Driver are set.
Make the settings according to the usage
environment.
Click the [OK] button when settings are completed.
Click!
[Controller Setting] from the
3.
4.

Advertisement

Table of Contents

   Related Manuals for Mitsubishi Electric GOT2000 Series

Comments to this Manuals

Symbols: 0
Latest comments: