Mitsubishi Electric GOT2000 Series Connection Manual page 197

Data item name
Specifies the head No. of the device data to be read/written.
For details of the device range that can be accessed, refer to the following.
3.3 Device Data Area
Head device
Transmit the data notated in decimal converted to a 6-digit
ASCII code, from the upper digit.
Specifies the number of device data to be read/written. (Setting range: 1 to 40
<When using random read/write command>
When setting multiple bit accesses, word accesses or double word accesses, limit the total number of access points to within 64 points.
<When using multiple block batch read/write commands>
Device points
When setting multiple blocks, limit the total number of points of all blocks to within 64 points.
Transmit the data notated in decimal converted to a 4-digit
ASCII code, from the upper digit.
Specifies year, month, day, hour, minute, second, and day of the week to be read/set to the GOT clock data.
Year, month, day,
■ Message format (1) Read clock data (1901) command
hour,
■ Message format (2) Set clock data (0901) command
minute, second and
day
of the week data
Transmit the data notated in decimal converted to a 2-digit
ASCII code, from the upper digit.
Appended to the response message from the microcomputer side. If an error occurs at the microcomputer side, the error code is
displayed.
End code
■ Error code list
(Microcomputer
side)
Transmit the data notated in hexadecimal converted to a 4-digit
ASCII code, from the upper digit.
POINT POINT POINT
When connecting a microcomputer, etc. that uses the MC protocol of the Q/QnA series serial communication
module with the GOT
When connecting a microcomputer, etc. that uses the MC protocol of the Q/QnA series serial communication
module with the GOT, correct the commands to be used and the device ranges to match the GOT specifications.
Contents
Format 6
3. MICROCOMPUTER CONNECTION (ETHERNET)
Format 7
Transmit the data converted to a 6-digit binary code from the lower
two digits.
)
H
Transmit the data converted to a 4-digit binary code from the lower
two digits.
Transmit the data converted to a 2-digit binary code.
Transmit the data converted to a 4-digit binary code from the lower
two digits.
3.4 Message Formats
(From previous page)
3
3 - 53