Ethernet Setting - Mitsubishi Electric GOT2000 Series Connection Manual

6.3.4

Ethernet setting

Item Description
The host is displayed.(The host is
Host
indicated with an asterisk (*).)
Set the network No. of the
N/W No. connected Ethernet module.
(Default: blank)
Set the station No. of the
*2
connected Ethernet module.
Station
(Default: blank)
*1
MODBUS/TCP (fixed)
Type
Set the IP address of the
IP Address connected Ethernet module.
(Default: blank)
Set the port No. of the connected
Port No. Ethernet module.
(Default: 502)
Communication
TCP (fixed)
format
*1 Select [MODBUS/TCP] for [Controller Type].
For the applicable Ethernet module, refer to the following.
6.2 System Configuration
*2 Each of [GOT Station] set in the communication detail setting
and [Station] set in the Ethernet setting must be set to
different station numbers.
6.3.2 Communication detail settings
6 - 6
6. MODBUS(R)/TCP CONNECTION
6.3 GOT Side Settings
POINT POINT POINT
Range
―
1 to 239
1 to 247
MODBUS/TCP
(fixed)
PLC side IP
address
1 to 65535
TCP (fixed)
Ethernet setting for GT21
(1) Effective range of the Ethernet setting
Only [1] to [4] of the Ethernet setting can be used
for GT21. Even though [5] or later of the Ethernet
setting is written to the GT21, the setting is
disabled on the GT21 side.
(2) Range of the host station setting
Set a host station within the range of [1] to [4] of
the Ethernet setting.
Only [1] to [4]
can be used.
Changing the host with GOT module
The host can be changed by the GOT module Utility.
For details of settings, refer to the following.
GOT2000 Series User's Manual (Utility)