Precautions - Mitsubishi Electric GOT2000 Series Connection Manual

16.5 Precautions


Connection/disconnection of USB cable
during print operation
When the USB cable is disconnected during print
operation, the printer hangs up depending on the model
of PictBridge compatible printer. In this case, turn on
the main power of the printer and then restart it.

When a printer cannot perform print
operation
While the initialization of the printer is being carried out
at boot time, some models of PictBridge compatible
printers send "Print Ready" signal to GOT.If printing
operation is started from GOT, an error will occur and
the printing operation will be disabled.If this occurs,
restart a printer with the following procedure.
1.
Disconnect the USB cable from the printer.
2.
Turn the power of the printer OFF.
3.
Disconnect the power supply cable of the printer and
stop the printer completely.
4.
Connect the power supply cable to the printer.
5.
Turn the power of the printer ON and wait until the
initialization processing of the printer is completed.
6.
Connect the USB cable to the printer.
For the handling errors occurred on the printer, refer to
the following.
Manual for the printer being used
16. PRINTER CONNECTION

16.5 Precautions

16
16 - 7