Got Side Settings; Setting Communication Interface - Mitsubishi Electric GOT2000 Series Connection Manual

Graphic operation terminal microcomputers, modbus/fieldbus products, peripherals
Hide thumbs Also See for GOT2000 Series:
Table of Contents

Advertisement

9.3 GOT Side Settings

9.3.1
Setting communication
interface
Controller setting
Set the channel of the equipment to be connected to
the GOT.
2.
1.
Select [Common]
[Controller Setting] from the
menu.
2.
The Controller Setting window is displayed. Select the
channel to be used from the list menu.
3.
Set Manufacturer, Controller Type, I/F, and Driver
according to the connected equipment to be used.
4.
The detailed setting is displayed after Manufacturer,
Controller Type, I/F, and Driver are set.
Make the settings according to the usage
environment.
Click the [OK] button when settings are completed.
POINT
POINT
POINT
The settings of connecting equipment can be set and
confirmed in [II/F Communication Setting]. For details,
refer to the following.
1.1.2 I/F communication setting
3.
1.
4.
2.
Click the [OK] button when settings are completed.
POINT
POINT
POINT
Click!
9. CONNECTION TO SOUND OUTPUT UNIT
Sound output unit setting
2.
Select [Common]
[Peripheral Setting]
[Sound Output] from the menu.
Set the interface to which the sound output unit is
connected.
(1) Communication interface setting by the Utility
The communication interface setting can be
changed on the Utility's [Communication setting]
after writing [Communication Settings] of project
data.
For details on the Utility, refer to the following
manual.
GOT2000 Series User's Manual (Utility)
(2) Precedence in communication settings
When settings are made by GT Designer3 or the
Utility, the latest setting is effective.
9.3 GOT Side Settings
Click!
9
9 - 3

Advertisement

Table of Contents
loading

Table of Contents