Configuring Dtc Ports With Dtcconfig; Configuring The Port Type - HP 9000 Series 700 Manual

Configuring DTC ports with dtcconfig
This chapter describes how to configure a port for the requirements of an attached
device. For example, if you want a printer on a certain port, you must ensure that the
port is set to be a printer port.

Configuring the port type

You can change a terminal port to a printer port (or vice versa) using the Change
Port Type option which you access via the Action Menu as illustrated below.
tsta195:root:/opt/dtcmgr/sbin
DTC Configuration Main Menu
Highlight an item and then press "Return" or "Select Item" (F4).
Add DTC Configuration ..
Modify DTC Configuration ....
Delete DTC Configuration ...
Modify Default Parameters ->
Help for Using DTCconfig
Select
Help
Shell
Item
Click here, or press F1 for online help
tsta195:root
DTC Name
Rear Panel Configuration
Board = C or L
Action Menu (F5)
Change Port Type
8
Exit
DTCconf
85