Including Dtc Manager/Ux In A High-Availability Package - HP 9000 Series 700 Manual

Including DTC Manager/UX in a high-availability package

You can now include DTC Manager/UX in an MC/ServiceGuard package by
following the instructions below.
On the original host
1 Follow the instructions in the MC/ServiceGuard documentation to generate and
2 For MC/ServiceGuard to work with DTC Manager/UX, you must edit the
Including DTC Manager/UX in a high-availability package
then modify a package configuration file template.
package control script,
control.sh
a Go to the variable definition section labelled:
# DTCs
b Remove the comments from the lines:
#DTC_IP[]=X.Y.Z.Q
#DTC_NAME[0]=dtc_name
c Edit the first line so that it specifies the IP address of the original host.
d Edit the second line to specify one of the DTCs managed by the original host.
e Add additional lines to specify the name of every DTC managed by the
original host (increment the number in brackets for each additional DTC).
Example: The system, whose IP address 15.128.5.4, manages two DTCs
called, and
dtc1 dtc2
script:
DTC_IP[]=15.128.5.4
DTC_NAME[0]=dtc1
DTC_NAME[1]=dtc2
f Distribute copies of the package control script to all nodes as described in the
MC/ServiceGuard documentation.
MC/ServiceGuard can now provide high availability to DTC Manager/UX.
, as follows:
. The following entries must be in the package control
12
147