Configuring A Port - HP 9000 Series 700 Manual

Configuring a port

1 Select Modify DTC Configuration from the dtcconfig main menu.
2 Type in a DTC name or press F1 and select a DTC from the list of existing DTCs.
3 In the Rear Panel Configuration screen, enter the board number to configure.
4 Use the arrow key to go to the port field and enter a port number according to the
5 Press the Action Menu (F5) function key and select one of the listed tasks.
6 When you have finished making your changes, return to the Rear Panel
7 You can configure another board and port or press F8 to exit the Rear Panel
A pop-up window asks you for the name of the DTC whose configuration you
want to modify.
Press Return or the Select Item (F4) function key.
The DTC Rear Panel Configuration screen appears.
DTC type:
• 0 through 15 - direct connect or modem ports for DTC 16TN
• 0 through 7 - direct connect ports for DTC 16 and DTC 48
• 0 through 5 - modem ports for DTC 16 and DTC 48
• 0 through 23 - direct connect or modem ports for DTC 72MX
You are taken to the appropriate screen to enter new port values. The screen and
the information you provide for each task varies depending on the type of board
(direct-connect or modem) and type of port (printer or terminal) you have
chosen to configure.
The port configuration screen displays the current defaults being used. The
Configure Port screen and Enable Port Options screen allow you to choose
HP Defaults, User Defaults, or enter other values.
The screens are described in the rest of this chapter.
Configuration screen.
Configuration screen and return the dtcconfig main menu.
Configuring a port
8
89