Modifying The Default Parameters - HP 9000 Series 700 Manual

9

Modifying the default parameters

Modifying the default parameters
Note
112
tsta195:root:/opt/dtcmgr/sbin
DTC Configuration Main Menu
Highlight an item and then press "Return" or "Select Item" (F4).
Add DTC Configuration ..
Modify DTC Configuration ....
Delete DTC Configuration ...
Modify Default Parameters ->
Help for Using DTCconfig
Help
Shell
Click here, or press F1 for online help
Default settings simplify DTC configuration management. When you first install
and use the dtcconfig utility, the user defaults are the same as the HP factory
settings. Once they are changed, they become the new default settings and are
automatically applied when new DTCs are added.
These modified default settings will be used to configure all DTCs that you
subsequently add to your configuration. The settings you can modify are:
• the user defaults for CPU/LAN board or LAN board parameters
• the user defaults for terminal and printer port parameters and options.
See the Table on page 114 which indicates the locations of parameter definitions.
When you are in any of the configuration screens (accessed via the Modify Default
Parameters Menu) you can press the Default Values (F6) function key. A pop-up
screen appears with HP Defaults and the current User Defaults. You can toggle
between the two default settings to see the differences.
The steps to modify DTC default parameters are as follows.
tsta195:root
Select
Item
Modify Default Parameters Menu
Exit
DTCconf