Examples Of Dtc User Interface Commands - HP 9000 Series 700 Manual

A DTC user interface commands
Status

Examples of DTC user interface commands

184
Each connection is identified as a number (xx) in the status command display. Only
the connection number can be used. The connection name can not be used. If the
connection number is not specified, the specified system connection is set.
Displays a table showing information about the open connections from the terminal.
The connection number is displayed by status.
S[TATUS]
The following examples show the DTC Terminal User help, status, and connect
commands you can enter. User input is bold type. The DTC prompt on the DTC in
the examples is DTC1>.
Examples of the connect command
DTC1>CONNECT ALPHA <return>
DTC1>C rainbow connection3<return>
DTC1> connect mysystem
Connection #1 established to MYSYSTEM.MKTG.COMPANY
To return to DTC interface, type <Ctrl>K
login:
DTC1> connect 15.13.13.13
Example of the disconnect command
DISCONNECT 1 <return>