Table of Contents
Advertisement
7
Configuring TCP parameters
Configuring TCP parameters
72
tsta195:root:/opt/dtcmgr/sbin
DTC Configuration Main Menu
Highlight an item and then press "Return" or "Select Item" (F4).
Add DTC Configuration ..
Modify DTC Configuration ....
Delete DTC Configuration ...
Modify Default Parameters ->
Help for Using DTCconfig
Help
Shell
Click here, or press F1 for online help
The Configure TCP Parameters screen is used to specify TCP timing information
for different LAN and extended LAN configurations.
1 Use the TAB key to move to a set field. Place an x or X to choose the set. The
timer values are defined by the set of values that you choose (see "The five sets
of TCP values" on page 73).
•
Set 1—(the HP Default setting) for traffic over the LAN only.
•
Set 2—for traffic over a LAN with bridges.
•
Set 3—for traffic over a LAN with exceptionally high transmission times.
•
Set 4—for networks with high data losses.
•
Set 5—for extended switching applications over a LAN, or a LAN with
bridges.
2 Press the Done (F4) function key to return to the Rear Panel Configuration
screen.
tsta195:root
Select
Item
DTC Name
Rear Panel Configuration
Board = C or L
Action Menu (F5)
Configure TCP Parameters
Exit
DTCconf
Advertisement
Table of Contents
