Port Parameters - HP 9000 Series 700 Manual

Port parameters

For a DTC port, port parameters and port options for
below.
Attached Device
Bits Parity
Data Transfer Mode
Default Destination
Escape from Data Transfer Character
Initialization String
Line Speed
Maximum Number of Sessions
Modem Behavior
Number of Systems Sharing Printer
Number of Stop Bits
Terminal/Printer Name or IP Address
To enable or disable the following port options, the
follows:
Enable Auto Speed/Parity Sensing (terminal ports only)
Enable Automatic Connection (modem ports only)
Enable Dedicated Printer (printer ports only)
Enable DTC User Interface Timeout (terminal ports only)
Enable Hardware Handshake (DTC 72MX and DTC 16TN ports only)
Enable Port
Enable Switching (terminal ports only)
Enable Keep Alive
Enable Flow Control
Enable Port Config Saved In Binary
Parameter name
x or X to enable the port option
Double quotes (" ") to disable the port option
Parameter definitions
are listed
parameter_name
Explained on:
page 94
page 94
page 96
page 97
page 96
page 98
page 93
page 96
page 95
page 97
page 95
page 93
is set as
parameter_value
10
131