Table of Contents
Advertisement
5
Checking the terminal connections
Checking the terminal connections
Configuration parameter definitions
DTC Name
50
Follow these steps for each terminal connected to the DTC.
1 Press Return. The DTC prompt, usually DTC>, should appear. Enter the
connect command with the IP address
DTC>
connect 15.13.12.12
Connection #1 established to mysystem.mygroup.mycorp
To return to DTC interface, type <CTRL>K
login:
2 If you are not successful, try to modify the configuration of the DTC (refer to
chapter 6). If the DTC does not respond, it probably means that the DTC LAN
address is not correct. Delete the DTC and then add it again.
3 If you still cannot establish a connection, go to the troubleshooting section in
chapter 15.
Enter a name consisting of up to 8 alphanumeric characters. You can include
hyphens (-) and underscores (_) but the first character must be alphabetic. The DTC
name field must not be left blank.
The DTC name is a unique name used by the DTC manager to identify a particular
DTC. For simplicity, the DTC name and the nodename portion of the DTC node
name are often the same name. However, they are used for separate tasks by the
DTC Manager/UX and the system.
1
You can only use a system name here if you have configured the system name in the DNS server.
1
of the system you want to connect to.
Advertisement
Table of Contents
