Snmp Parameter Definitions - HP 9000 Series 700 Manual

SNMP/MIB Data Configuration screen

SNMP parameter definitions

Contact Name
Enter up to 255 ASCII characters. Contact the SNMP manager of your network to
find the name of the contact person to enter for this DTC. This optional field can
include information on how to contact the person as well as a name.
Sys Name
Enter up to 255 ASCII characters if you want to use this optional field. Contact the
SNMP manager of your network to find the system name you should enter here.
This name will be used to identify the DTC as an SNMP node and is by convention
the same as the DTC node name.
Sys Location
Enter up to 255 ASCII characters to specify the physical location of the DTC. This
is an optional field.
SNMP Enable
Set this optional field to Disabled or Enabled. Enabled means that the SNMP
Authentication Traps process agent of the DTC can generate authentication failure traps.
Trap Destination IP
Enter the IP addresses (non-broadcast) that designate the SNMP network
Address management stations on the network to which the DTC will send SNMP traps. If no
trap destination IP addresses are entered, the DTC will not generate any SNMP
traps.
tsta195:root:/opt/dtcmgr/sbin
SNMP/MIB Data Configuration
Fill in or modify the desired fields and then press "Perform Task" (F4).
MIB II System Group Objects:
. . . . . . . . . . . .
Contact Name . . . . . . .
Sys Name. . . . . . . . . . . . . . . . . . . . . . .
Sys Location . . . . . . . . . . . . . . . . . . . .
SNMP Enable Authentication Traps . .
HP-UX MIB Trap Destination (optional):
Trap Destination IP Addresses . .
003.003.003.003 004.004.004.004 005.005.005.005
Perform
Help
Shell
wally LAN board
Joe User__________________
anydtc____________________
site 1_____________________
Enabled
001.001.001.001 002.002.002.002
006.006.006.006
tsta195:root
Default
Values
Configuring SNMP MIB data
(optional)
(optional)
(optional)
Exit
Task
81
7