Configuring Terminal And Printer Port Parameters - HP 9000 Series 700 Manual

Configuring terminal and printer port parameters

1 Use the dtcconfig utility Action Menu to access either the Terminal Port
2 Use the configuration screen to enter the appropriate parameter values (the
3 When you have finished entering values F4 to return to the Rear Panel
tsta195:root:/opt/dtcmgr/sbin
DTC Configuration Main Menu
Highlight an item and then press "Return" or "Select Item" (F4).
Add DTC Configuration ..
Modify DTC Configuration ....
Delete DTC Configuration ...
Modify Default Parameters ->
Help for Using DTCconfig
Select
Help
Shell
Item
Click here, or press F1 for online help
Parameters Configuration screen or the Printer Port Parameters
Configuration screen (shown on the following page).
parameters are described on the following pages).
Configuration screen.
Configuring terminal and printer port parameters
tsta195:root
DTC Name
Rear Panel Configuration
Board = #, Port = #
Action Menu (F5)
Configure Port Parameters
8
Exit
DTCconf
91