Parameter Definitions - HP 9000 Series 700 Manual

Parameter definitions

-c Lists the DTC configurations. If
managed by the host computer is displayed.
Lists the DTC user default configuration.
-C
The dtclist command supports the following logging options.
logging
-a
-l loglevel
-L logfile
Appends the log messages from the dtclist command to the existing dtclist log
file. By default, the existing log file is overwritten. The default log file is
/var/opt/dtcmgr/event.log
Sets the amount of information to be logged for this current dtclist command.
Specify one of the following logging levels:
0 Logs only startup and termination messages of dtclist.
1 Logs serious and fatal messages and level 0 messages. This is the
default logging level.
2 Logs warning and informational messages and level 0 and level 1
messages.
Specifies an alternative file that dtclist should use to log status and error
messages of dtclist. The default file is /
is not specified, then the list of DTCs
object
.
var/opt/dtcmgr/log/dtclist.log
Using dtclist
14
167